 Purpose
Patterns conversion unit (BPK2) TALM 465651.006 is
intended for converting the protocols of data
transmission channel level in case of two control
systems or two technical facilities complexes
interaction via two channels.
Main functions
BPK2 includes two independent semi-sets, either
provides:
- Data exchange with each of two control systems
or technical facilities complexes via one channel in
compliance with their respective protocols;
- Conversion of data patterns used by one of the
interacted control systems or technical facilities
complexes into patterns used by another one and vice
versa;
- Data transmission to one of the interacting
control systems or technical facilities complexes
via allocated tone frequency channel using external
modem, via digital channel or physical line;
- One-way data transmission of one of the
protocols (input or output) to supplementary
control system or technical facilities complex
simultaneously with the main interacting ones.
Main performance
specifications:
|
Interface with the system (complex), or modem: |
Interface type
Data rate
Transmission method
Transmission mode |
C2 GOST 18145-81 (RS-232S EIA, V.24/V.28 ITU-T)
2400, 4800, 9600 bps
Asynchronous or synchronous
Duplex or simplex |
|
Physical line interface (on supplementary agreement) |
Interface type
Signal
Data rate
Transmission method
Transmission mode |
C1-Physical line in accordance with GOST 27373-84 and
GOST 27232-87
bipulse
2400, 4800, 9600 bps
synchronous
Duplex or simplex |
|
Power supply by one or two feeders of single-phase power
system |
Voltage, V
Frequency, Hz |
(187÷242)
(50±1) |
|
Power consumption, no more, VA |
10 |
|
Dimensions, mm |
160 x 250 x 260 |
|
Weight (with spares board), no more, kg |
5.5 |
|
Operation mode |
Round-the-clock, continuous |
 |
|
Main application
BPK2 is used for realizing the radar complexes plot
extracting equipment (APOI "VUOKSA", "PRIOR") interface
with ATC automated systems and complexes of automation
facilities.
pages:
previous (BAPD) |
next (BRS2) >> |
