Interface with Radar Complex APOI, ACP-RP (ARP-75, ARP-80) and "PLATAN" ADF:
Interface type:  Data rate:  Transmission method:  Transmission mode:	RS-232S EIA ( V.24 / V.28 ITU-T, C2 GOST 18145-81 ) 9600 bps serial asynchronous simplex (BPRD - receiving) or duplex
Interface with monitoring and control equipment specifications:
Interface type:  Data rate:  Transmission method:  Transmission mode:	RS-232S EIA ( V.24 / V.28 ITU-T, C2 GOST 18145-81 ) 9600 bps serial asynchronous duplex
Interface with external modem (when transmitting via tone frequency channel) and multiplexer (when transmitting via digital channel) specifications :
Interface type:  Data rate:  Transmission method:  Transmission mode:	RS-232S EIA ( V.24 / V.28 ITU-T, C2 GOST 18145-81 ) 2400, 4800 or 9600 bps serial synchronous and asynchronous simplex (BPRD- transmission) or duplex
Interface with tone frequency channel (when using the internal modem):
Interface type:  Channel type  Data rate:  Transmission method:  Transmission mode:	C1-TCH GOST 25007-81 standard four-wired 2400, 4800 or 9600 bps serial synchronous or asynchronous simplex (BPRD- transmission) or duplex
Interface with physical line specification:
Interface type:  Signal type:  Data rate:  Transmission method:  Transmission mode:	C1-FL GOST 27373-84 and GOST 27232-87 bipulse 2400, 4800 or 9600 bps serial synchronous simplex (BPRD- transmission) or duplex
Interface with monitor display and computer specifications:
Interface type:  Data rate:  Transmission method:  Transmission mode:  Semi-sets switch on/off control:	RS-232S EIA ( V.24 / V.28 ITU-T, C2 GOST 18145-81 ) 9600 bps serial asynchronous simplex (BPRD - transmission) local, remote, automatic
Power supply from one or two feeders of single-phase AC power system
Voltage, V Frequency, Hz	187÷242 50÷1
Consumed power, VA, no more than	12.0 ( 20.0 when using internal modems )
Dimensions (depth x width x height)	235 x 238 x 295 mm
Weight, kg, no more	6.0 ( 7.0 when using external modems )
MTBF, h, not less	10 000
MTTR, h, no more	0.5
Operation mode	round-the-clock, continuous

Adaptation capability

Radar data transmission unit can be adapted to operation conditions and the Customer requirements in following specifications:

• APOI and ADF types and input signals parameters;
• "NORTH" message (priority / nonpriority);
• output patterns format;
• backward channel using for realization of transmitted information test receiving by tails formation on the receiving modems outputs in ATC control center or for data transmission from ATC control center;
• communicational channel type;
• modems using;
• transmission rate and method;
• design.

pages: previous (BPRD) | next (BAPD) >>