Airport Radio Facilities Remote
Control and Monitoring Complex (KDKU RTO)
Purpose
KDKU RTO is intended for remote monitoring and control
of the airport objects equipped with PAR-10 homing
beacons, SP-80 landing systems or with other flights
supporting radio facilities.
Equipment components
1. Technical supervisor automated working position
deployed at the ATC center (TWR), including:
- Pentium II based PC with software;
- Central switch unit (BTsK) TALM.465645.008.
2. Execution units, installed on the control objects,
including execution units (BIP) TALM.465561.020 or
execution unit boards built-in into the Customer
equipment on agreement.
3. Communication channels between the center switch unit
and execution unit, partially or completely provided by
the Customer.
Main functions
Acquisition
and processing of the control objects, KDKU
equipment and communication
channels status and operability information;
Transmission of the messages and control
commands to the control objects via two
communication channels (main and backup);
Automatic communication channels switching;
Automatic switching to KDKU backup remoted
equipment and/or backup communication
channels with the control objects in case of the
equipment or communication channels
failure;
Transmission of the information on control
objects status and operability to the technical
supervisor automated working position and, when
necessary, to supplementary remote equipment;
Visual and audio signaling on emergency state of
controlled objects, communications channels and also
the technician operations;
Fixing and recording of any system changes and
technician operations;
Statistical processing of the equipment status
and operability information.
Acquisition
and processing of the control objects, KDKU
equipment and communication
channels status and operability information;
